Do you need to repair your GR2100 Campbell Hausfeld 10 Gal Air Compressor and Generator? Looking for the Campbell Hausfeld 10 Gallon Air Compressor and Generator GR2100 Parts?
Here you can find full parts list for Campbell Hausfeld GR2100 Model and exploded view with the locations of each part of the air compressor.
| Ref. No. | Description | Part Number | Qty. |
|---|---|---|---|
| 1 | Chassis assembly with rivet nuts | GW010412SJ * | 1 |
| 2 | Air gauge guard | GW010661KK | 1 |
| 3 | 6 inch Air tank | AR065101KK AR065100KK * | 2 |
| 4 | Unloader/check valve with nipple | GW010635AV | 1 |
| 5 | 1/2 inch I.D. PTFE hose with SS braid | MJ115014AV | 1 |
| 6 | 1/4 inch MNPT, Push to connect fitting | ST081301AV | 3 |
| 7 | 1/4 inch Tube, FEP (replaces short tube and pressure switch) * | MJ115022AV | 1 |
| 8 | Drain valve | D-1403 | 1 |
| 9 | Reducer Bushing – 3/8 to 1/4 NPT | ST071435AV | 1 |
| 10 | 1/2 inch MNPT Plated fitting with 1/2 inch barb (200 psi) | MJ114030AV | 3 |
| 11 | 1/2 NPT Street elbow plated fitting (200 psi) | * | 3 |
| 12 | Hex bolt, 3/8-16 UNC x 1.00 inch | * | 2 |
| 13 | 3/8 inch Lock washer | * | 2 |
| 14 | Tank cradle bracket | GW010613KK | 2 |
| 15 | Solenoid valve – 3 port NC | GW010630AV | 1 |
| 16 | Pan head screw, #8-32 x 1/2 inch | * | 2 |
| 17 | Street elbow plated fitting, 200 psi – 3/8 NPT (M x F) | * | 1 |
| 18 | 3/8 inch NPT Plated fitting with 1/2 inch barb (200 psi) | MJ114025AV | 3 |
| 19 | 1/2 inch I.D. Flex hose – 300 psi | * | 1 |
| 20 | Branch tee plated fitting, 200 psi – 3/8 NPT (F x M F) | * | 1 |
| 21 | Air regulator with round knob | PA210100AV | 1 |
| 22 | Air manifold – tank side | GW010580AV | 1 |
| 23 | Air manifold – regulator side | GW010585AV | 1 |
| 24 | 2 inch Air gauge – 200 psi | MJ119700AV | 2 |
| 25 | Air manifold spacer | GW010656AV | 4 |
| 26 | ASME safety valve | V-215200AV | 1 |
| 27 | 1/4 inch Washer | * | 4 |
| 28 | Hex bolt, 1/4 inch – 20 UNC x 1.00 inch | * | 4 |
| 29 | Pipe nipple, 3/8 NPT x 1-1/2 inch Pipe nipple, 3/8 NPT x 2 inch * | * | 2 |
| 30 | Quick connect fitting – 3/8 NPT female (200 psi) | MJ114031AV | 2 |
| 31 | 5/16 inch Flat washer | * | 2 |
| 32 | Hex bolt, 5/16 – 18 UNC x 3/4 inch | * | 2 |
| 33 | 45° Plated elbow – 1/2 MJIC x 1/2 MNPT (200 psi) | MJ114029AV | 1 |
| 34 | 3/8 inch Flat washer | * | 2 |
| 35 | Wiring Bushing | MJ110212AV MJ110209AV * | 5 4 |
| 36 | 1/8 inch NPT Plug | * | 1 |
| 37 | Campbell Hausfeld Decal (front and back) [Not Shown] | DK667873AV | 2 |
| 38 | GR2100 Specifications Decal (Unit Front) [Not Shown] | DK667874AV | 1 |
| 38 | GR3100 Specifications Decal (Unit Front) [Not Shown] | DK667875AV | 1 |
| 39 | Warning Decals [Not Shown] English and Spanish French and Portuguese | DK667872AV DK667888AV | 1 1 |
| 40 | Startup-Unload Decal [Not Shown] | DK667876AV | 1 |
| 41 | Warning Decal, Hot Surface (compressor) [Not Shown] | DK631100AV | 1 |
| 42 | Spark Arrestor Decal (engine) [Not Shown] | DK065101AV | 1 |
| 43 | CPSC Warning Decal, 3.25 inch x 8 inch [Not Shown] | DK667848AV | 1 |
| 44 | Warning Decal, Earth Ground [Not Shown] | DK667849AV | 1 |
| 45 | Fuel Explosion Warning Decal [Not Shown] | DK197101AV | 1 |
| 46 | 12V Circuit Breaker Decal [Not Shown] | DK667877AV | 1 |
| — | Not available | – | – |
| * | Standard hardware item – available at your local hardware store | – | – |
| ◆ | This part is common to all models | – | – |
| * | This part is for GR2100 and GR3100 units with T-handle regulators. | – | – |
