Husky Vibration Damped Medium Stroke Air Hammer, H4620

Husky is known for its air tools which are built and designed for industrial purposes and for professional users. A tool that can be a good addition to your awesome collection is Husky Vibration Damped Medium Stroke Air Hammer.

One of its unique features is its isolated cylinder design which reduces the vibration by 50%. Because of this, the user will be able to use to tool with ease and comfort even for an extended period of time. To reduce your exposure to vibration, it is recommended to use the tool in high volume applications.

The cylinder of this Husky air hammer is lengthier than the cylinder of other models. This allows for a harder hitting power that is needed for different projects. The hammer accepts standard 0.401 in shank chisels. Since it is a Husky medium stroke air hammer, it works best for construction purposes. It can be used to cut metals, shear bolts and rivets, and drive out pins used on cars, trucks, recreational vehicles, and structural maintenance and repair.

This air tool has an output of 3000 blows per minute allowing you to finish your tasks quickly. Its air consumption is 4 CFM at the recommended operating pressure which is 90 psi. The stroke length (medium stroke) is 2.63 in. With these specifications, you can easily chisel concrete in a wide area and up to more than 3 inches deep. You may also remove tiles and do gout and mortar prepping for a new tile install using this air hammer.

For this Husky air hammer, you would need an air compressor that has a storage tank capacity of at least 12 gallons. Lesser ones would not be able to supply the requirements of the unit. However, for optimum performance, it is recommended to use a 20-gallon tank capacity air compressor. It is a very simple tool that surpasses your standard chisel and sledge hammer. Unlike other air tools, you can really feel that this air hammer is mechanically smooth. Its vibration dampening feature works perfectly for the user’s convenience.

Husky Vibration Damped Medium Stroke Air Hammer, H4620

Husky Vibration Damped Medium Stroke Air Hammer, H4620

Model # H4620
Air Tool Type Grinder
Weight  4.06 lb
Type Construction
Recommended operating pressure 90 PSI
Air consumption 4.0 CFM
Air Inlet Size 0.25 inches
Max blows per minute 3000
Stroke length 2.63 inches
Width 1.81 inches
Depth 9 inches
Height 5.19 inches
Warranty 2 Year
Cost from $49.98

This Husky air hammer is very durable with its low weight housing that is made of steel. It has a rubberized comfort grip so users would not have a hard time in controlling the tool. It is very light, weighing only 4.06 lbs. It has no variable speed but the standard rate is already good enough. The hammer also features a quick change spring retainer which adds to its efficiency. Do not be fooled with its compact design because it can work big wonders for you.

Husky Vibration Damped Medium Stroke Air Hammer can be bought for less than $50.00. When hammering it down, you will feel the extra power that this unit provides. The shock is greatly reduced so you will be working as if the tool does not produce vibrations. Husky would never let you down with this air hammer. Make sure to check it out on your next visit to your local home store.

If you already own Husky H4620 model or just want to buy it, feel free to share your review or ask a question through the form below.

Discussion: 2 Comments
  1. Shane
    November 8, 2019 at 6:26 pm

    Can u get a quick chulk so you dont have to use the spring

  2. Kenneth Biggs
    March 15, 2020 at 12:43 pm

    Is there any more bits to scrap the plaster off pool got little chisel attachment but need a wider bit any one know where to find them? Home Depot only gots a 3 piece set

Add Your Comment