Do you need to repair your TF2912 Husky 80 Gallon Air Compressor or looking for the Husky 80 Gal Air Compressor TF2912 Parts? Then You have come to the right place.
Here you can find full parts list for Husky TF2912 Model and an image with the locations of each part of the air compressor.
| # | Description | Part Number | Qty. |
|---|---|---|---|
| 1 | Replacement pump (no flywheel) | TF2511 | 1 |
| 2 | Vertical air tank | TF006605AJ | 1 |
| 3 | 7/16” – 14 x 11⁄2” Hex head screw | ST070645AV | 4 |
| 4 | 7/16” Washer | ST070916AV | 8 |
| 5 | 7/16” – 14 Hex nut | ST070729AV | |
| 6 | 3/8” NPT Drain cock | ST127700AV | 1 |
| 7 | Discharge tube | TF062200AP | 1 |
| 8 | Nut and ferrule | ST072321AV | 1 |
| 9 | 3/4” Check valve | CV003404AV | 1 |
| 10 | 1/4” Compression fitting | ST011701AV | 1 |
| 11 | 1/4” NPT, 300 psi pressure gauge | GA016703AV | 1 |
| 12 | 1/4” – 18 x 21⁄2” Pipe nipple | ST070387AV | 1 |
| 13 | Safety valve | V-215200AV | 1 |
| 14 | Pressure switch, 145/175 (**) | CW207561AV | 1 |
| 15 | Copper tube, 2 ft. | R-060600AY | 1 |
| 16 | Motor | MC301521AV | 1 |
| 17 | 5/16” – 18 x 1/2” Set screw | ST026400AV | 2 |
| 18 | Belt | BT008500AV | 1 |
| 19 | Pulley | PU009750AV | 1 |
| 20 | 3/8” – 16 x 11⁄4” Screw | ST070638AV | 4 |
| 21 | 3/8” Washer | ST070914AV | 4 |
| 22 | 3/8” – 16 Nut | ST033500AV | 4 |
| 23 | 3/8” External tooth washer | ST072608AV | 2 |
| 24 | Belt guard front | BG217001AV | 1 |
| 25 | Belt guard back | BG217100AV | 1 |
| 26 | Cap | ST075400AV | 5 |
| 27 | Hex flange nut | ST116201AV | 5 |
| 28 | Bolt | ST016500AV | 2 |
| 29 | Washer | ST011200AV | 2 |
| 30 | 1/4” – 20 x 3/4” Bolt | ST074415AV | 1 |
| 31 | 1/4” Washer | ST070910AV | 1 |
| 32 | Beltguard bracket | TF063400AV | 1 |
| 33 | Discharge tube | TF061500AP | 1 |
| 34 | 3/4” check valve | CV003205AV | 1 |
| 35 | 90° compression fitting | ST072231AV | 1 |
| 36 | 1/2” x 1/4” reducer bushing | ST071428AV | 1 |
| 37 | Flywheel | PU016401AV | 1 |
| * | Isolation pads (pack/3 – verticals) | ZZ000043AJ | 1 |
| * | Warning decal | DK630000AV | 1 |
| UNITS WITH MAGNETIC STARTERS ONLY | |||
| 38 | Magnetic STarter bracket | BG215300AV | 1 |
| 39 | Self-threading screw | ST016500AV | 2 |
| 40 | Magnetic starter assembly | ST122010AJ | 1 |
| 41 | 8-32 x 7/16” Hex screw | ST074407AV | 4 |
| 42 | Heater element for magnetic starter assembly available separately | PS005551AV | 1 |
| (**) | Unloader valve for pressure switch available separately | CW000200AV | 1 |
| (*) | Not shown | ||
Check here if you need parts list for Husky TF2511 Pump.
